Artiteq self-adhesive DiBond Rails per piece in 7 dimensions

The Artiteq DiBond Rail, made of non-anodized aluminum, has been developed to make your DiBond, Forex, mirror, etc. both safer and easier to attach. It has the ability to adjust the object in height. It also ensures that the object hangs more firmly and beautifully, especially thin objects. The thickness of the rail itself is 15mm, which is also the distance from the back of the panel to the wall.

Except for the 300cm lengths (these come in a bundle of 5 pieces, with a minimum quantity of 10 pieces per order), all other dimensions are supplied separately and per piece. The corner connectors and wall hooks with associated screws and plugs are optional. FYI: other lengths are available on request; with a minimum of 10 pieces per size.

Please note: The 300cm lengths are only delivered in the Netherlands and Belgium.

Suggestion: Where possible, try to stay approximately 10cm from each side for maximum carrying capacity. If desired, you can cut the rail to size yourself with a hacksaw.

The load-bearing capacity depends on many factors, such as the surface and the material of the (photo) panel itself. It is also very important to thoroughly clean the surface to be stuck with an alcohol cleaner and to wait at least 72 hours before hanging the object. Advice: Do not use on photo paper.

We recommend using our Back Frame Rail System for printed panels made of aluminum (DiBond), rigid foam, Forex, acrylic and glass. Our tape can support a panel of up to 4 square meters with a maximum total weight of 25kg and minimum dimensions of 40x40cm when the profiles of the Back Frame Hanging System are placed at a maximum distance of 10cm from each side of the printed panel.