Incl. VAT
0
Account
(0)

Uw winkelwagen

close
Uw winkelwagen is leeg
Incl. VAT
Artiteq Back Frame insertion corner - per each
Artiteq Back Frame insertion corner - per each
Artiteq Back Frame insertion corner - per each
Artiteq Back Frame insertion corner - per each
Artiteq Back Frame insertion corner - per each
Artiteq Back Frame insertion corner - per each
Artiteq Back Frame insertion corner - per each
Artiteq Back Frame insertion corner - per each
Artiteq Back Frame insertion corner - per each
Artiteq Back Frame insertion corner - per each
Artiteq Back Frame insertion corner - per each
Artiteq Back Frame insertion corner - per each
Artiteq Back Frame insertion corner - per each
Artiteq Back Frame insertion corner - per each
Artiteq Back Frame insertion corner - per each
Artiteq Back Frame insertion corner - per each
Artiteq Back Frame insertion corner - per each
Artiteq Back Frame insertion corner - per each
Artiteq Back Frame insertion corner - per each
Artiteq Back Frame insertion corner - per each
Artiteq Back Frame insertion corner - per each
Artiteq Back Frame insertion corner - per each
Previous keyboard_arrow_left
Next keyboard_arrow_right
zoom_in

Maak je bestelling compleet:

Artiteq Back Frame suspension and safety discs - per piece
Artiteq Back Frame suspension and safety discs - per piece
€0.50
Artiteq Back Frame safety key
Artiteq Back Frame safety key
€4.72
Artiteq Classic Rail Screw - 3.5x45mm
Artiteq Classic Rail Screw - 3.5x45mm
€0.10
Artiteq plug 6mm universeel
Artiteq Universal Plug - 6mm
€0.08
GeckoTeq Re-usable Loop Hanger for 2.0mm wire
GeckoTeq Self-Locking Loop Hanger Cable Gripper for 2.0mm wire
€2.75
Artiteq perlondraad/koord 2mm met twister
Artiteq 2,00mm Twister Perlon Wire
€3.81

Artiteq Back Frame insertion corner - per each

€1.50
VAT included
Reference: 0517010

These corner pieces are sold per each

Shipment
€1.50
VAT included
Ordered before 12pm, shipped today
More than 25+ years of experience
Largest range in Europe

Volume discounts

Quantity Unit discount You Save
100 10% €15.00

Connecting the profile parts is easy. Press the corner connector into a profile part until the straight surfaces of the profile and the corner connector are closely aligned. Then you do the same action with the next profile part.

If the connection is not entirely successful, do not use any hard tools to achieve your goal. A small rubber mallet is sufficient for a good closure. Perhaps unnecessarily, it is important to make sure that the correct lengths are connected.

Continue in this way until a U-shape is formed. You can now place the two remaining slide-in corner connectors in the remaining profile at the same time and then connect it to the existing U-shape so that a solid frame is created.

The "flat" surface of the molded plastic insertion corner has a unique combination of curves to create a slightly concave surface on the bonding surface. This minimizes the risk that the sharp corner of a miter frame will cause a bump on the front of the panel when bent.

0517010